Galaxy DX-73V, Owner'S Manual, Page: 7 / 8

OPERATING
A. MICROPHONE
The receiver and transmitter are controlled by the press-to-talk switch on the
microphone. Press the switch and the transmitter is activated, release switch
to receive. When transmitting, hold the microphone two inches from the
mouth and speak clearly in a normal “voice”. The radios come complete with
low-impedance (500 ohm) dynamic microphone.
B. PROCEDURE TO RECEIVE
1. Be sure that power source, microphone and antenna are connected to the
proper connectors before going to the next step.
2. Turn unit on by tuning VOL control clockwise on your transceiver.
3. Set the VOLUME for a comfortable listening level.
4. Set the MODE and BAND switch to the desire mode and band.
5. Listen to the background noise from the speaker. Turn the SQUELCH
control slowly clockwise until the noise just disappears (no signal should
be present). Leave the control at this setting. The
SQUELCH is now
properly adjusted. The receive will remain quiet until a signal is actually
received. Do not advance the control too far, or some of the weaker
signals will not be heard.
6. Set CHANNEL selector switch to the desired channel.
7. Set the RF gain control fully clockwise for maximum RF gain.
8. Adjust
CLARIFIER control to optimize AM/FM signals.
C. PROCEDURE TO TRANSMIT
1. Select the desired channel of transmission.
2. Set the MIC GAIN control fully clockwise.
3. If the channel is clear, depress the push-to-talk switch on the microphone
and speak in a normal voice.
WARRANTY
THIS RADIO HAS ONE YEAR PART AND
LABOR WARRANTY.FOR WARRANTY
SERVICE PLEASE CONTACT YOUR
DEALER
MEMO
- 12 - - 11 -