Galaxy 4500MGB Quad Bay, User Manual

Page: 7 / 22

4500MGB Quad Bay User Guide
Page 3 / Chapter 1 - Introduction
If your Operating
System does not
support single
volumes larger than
2TB, make sure the
2TB volume switch
on the 4500MGB
Quad Bay is at
position B, so that
larger volumes are
automatically split
into two smaller
ones.
The 2TB LED
indication will light
up when the total
capacity of the
installed hard drives
exceeds 2TB. This
is not related to the
RAID mode but an
indication to remind
you that a single
volume will exceed
2TB in capacity.
Rear View
1. Smart fan 6. FireWire 800 ports
2. Security lock slot 7. USB 2.0 port
3. 2TB volume switches 8. Power receptacle (100-240V)
4. 2TB volume indication 9. Power supply ON/OFF switch
5. FireWire 400 port
2TB Volume Switch
When the total capacity of the installed drives exceeds 2TB, the
2TB LED will light up. When the 2TB switch is set to B,
volumes larger than 2TB will automatically be split into two
smaller volumes (A+B / C+D). If your Operating System
supports volumes larger than 2TB (e.g. 64bit OS), setting the
2TB switch to A will create one large volume instead.
Smart Fan
The smart fan automatically regulates the fan speed according
to the internal temperature. It will start using low speed from 0-
44 degrees, increase the speed every 5 degrees until 60
degrees and use full speed above 61 degrees Celsius.
2
9
3
5
8
4
1
6 7