2
THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND
ABOVE AND PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL
CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE IF THEY HAVE
BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE
APPLIANCE IN A SAFE WAY AND UNDERSTAND THE HAZARDS INVOLVED.
CHILDREN SHALL NOT PLAY WITH THE APPLIANCE.
CLEANING AND USER MAINTENANCE SHALL NOT BE MADE BY CHILDREN
Your shower has been designed for
convenience, economy and safety of use,
provided that it is installed, used and
maintained in good working order and in
accordance with our instructions and
recommendations.
ALL WIRING AND INSTALLATION
MUST BE SUPERVISED BY A
SUITABLY QUALIFIED PERSON.
THIS APPLIANCE MUST BE
EARTHED.
The installation must be in accordance with
the current edition of BS.7671 (
the ‘IET Wiring
Regulations’)
and ‘Part P’ of the ‘
Building
Regulations’
in force at the time of installation.
Installations outside England and Wales must
also conform to any local regulations in effect
This appliance is intended to be permanently
connected to the fixed electrical wiring of the
mains supply with its own dedicated supply.
This appliance must
NOT
be fitted where it
may be subjected to freezing conditions.
DO NOT SWITCH THE APPLIANCE
ON IF YOU SUSPECT IT OF BEING
FROZEN. WAIT UNTIL YOU ARE
SURE IT HAS THAWED OUT.
This appliance is not suitable for mounting
into steam rooms or steam cubicles.
Isolate the mains electrical and water supply
before removing the appliance front cover.
DO NOT
fit any sort of tap or control on the
appliance outlet.
The appliance is designed to have an open
outlet and should only be used with the
Manufacturer’s recommended fittings.
This shower is designed and approved to
EN-60335 with the handset provided.
Under no circumstances must any handset
that is not approved by the manufacturer
be used with this product.
Take care to avoid restricting the outlet of the
pressure relief device (fig.15).
If water is discharged from the pressure relief
device, maintenance will be required before
the appliance can be safely used.
We
DO NOT
recommend this appliance be
used in heavy or unsupervised commercial
applications.
**In order to avoid damage to your shower,
isolator must be turned off between uses**
The following points will help you have a greater
understanding of how your shower works:
The electric heating elements operate at a
constant rate, dependent on your chosen
power setting.
The required water temperature is achieved
by adjusting the rate of water flow.
The higher the water flow the lower the
temperature and vice versa.
The temperature of the water supplied from
the mains can vary considerably throughout
the year from 5 to 20°C.
This means that in the winter, flow rate will be
less than in the summer to achieve the same
outlet temperature.
In summer the ‘Eco’ power setting may give
adequate hot water.
Your shower is designed to stabilise
temperature changes caused by water
