NOTE
: The following wiring examples are not affected by whether the lift is wired for 240V or 120V
Overlimit Set Up
1.
Connect the black wire from
the Overlimit cable to the
black wire coming from the 9
Pin Molex connecter.
2.
Connect the white wire from
the Overlimit cable to the
black wire coming from the
back of the contactor.
3.
Use wire nuts to secure
connections.
(CB)
Summary of Contents for 1M3S
