19
Step 3.
Place one
straight coupler tube between the two
brackets.
Step 4.
It is optional to screw the base brackets to the base of
the spa from within the cabinetry, or onto decking (if
placing the spa on a deck). However, the weight of the
spa once filled with water will be sufficient to hold the
bracket securely. Use the
metal screws if you plan to
permanently secure it.
Step 5.
Place the
bent arm without foam through the tubular
hole (circular part on the bracket).
Important:
+
If the width
is less than 2m, connect the short ends
to the straight coupler.
+
If the width
is 2m or more, connect the long ends to
the straight coupler.
Step 6.
Once you have connected the
bent arms without foam
to the
straight coupler tube, ensure that the length
corresponds to your spa model (see the chart in step 1)
by sliding the tubes to the appropriate length.
The spa pictured is 2m x 2m, so the long ends are shown
to be connected to the straight coupler.
