10
Cover Lifter
A cover lifter is an accessory that attaches to the spa pool and supports removing the cover. Not
only does it help get the spa cover off quickly and easily, it also protects the cover from getting
damaged during the process. See the below details for model-specific clearance.
Columba and Solarium
50cm rear and 10cm side clearance is required (5cm on each side).
You will need to lift your empty spa slightly to install the cover lifter correctly. Once filled with
water, it will be too heavy.
Spa
Cover Lifter
Cover Locks
+
The spa cover requires 32.5cm of space from the top of the installed cover down each side of
the cabinet to the lock clips.
+
This space is required. Not providing the necessary clearances will mean you cannot install
your cover properly or lock it.
+
Even when your spa is fenced, we recommend locking your cover locks to prevent the wind
from dislodging the cover and unattended children from entering the spa.
Heat Pump
+
Your spa is heat pump compatible.
+
If purchase this add-on, it must be placed a minimum of 1.2m away from the spa so that it
cannot be used as a climbable surface.
+
There must be a minimum 3m clearance in front and 1.5m clearance behind the heat pump
for it to efficiently circulate airflow.
+
The heat pump needs to be on a concrete foundation.
For more information, please refer to the
found on our website.
