12
Cover Lifter
A cover lifter is an accessory that attaches to the spa pool and supports removing the cover. Not
only does it help get the spa cover off quickly and easily, it also protects the cover from getting
damaged during the process. See the below details for model-specific clearance.
Venus, Aquila II, Orion and Hydra
50cm rear and 10cm side clearance is required (5cm on each side).
You will need to lift your empty spa slightly to install the cover lifter correctly. Once filled with
water, it will be too heavy.
Spa
Cover Lifter
Cover Locks
+
The spa cover requires 32.5cm of space from the top of the installed cover down each side of
the cabinet to the lock clips.
+
This space is required. Not providing the necessary clearances will mean you cannot install
your cover properly or lock it.
+
Even when your spa is fenced, we recommend locking your cover locks to prevent the wind
from dislodging the cover and unattended children from entering the spa.