User Manual
Menu Operations
22
Press [OK] key to select satellite. Press [Page /Page
] key to page up or page down.
10.1.2 LNB Type
Press [right] key to select this item, press [OK] key and
[Up/Down] key can switch among “Standard”, “User”,
"unicable" and “Universal” mode.
For Example: you can select the Unicable config mode,
if you choose manual mode, you should setting the IF
Index, IF Frequency and Satellite Position according
your LNB type.
10.1.3 22K
You can use [OK] and [Up/ Down] key to switch “On /
Off”. When this item is switched to “ON”, receiver will
receive TV and radio input signal from 22 KHz port. If
the item is switched to “Off”, the receiver will receive all
signals from 0 KHz port.
Notice
When you choose LNB type “Universal”, you can not
modify
22K
.
10.1.4 0/12V
You can use [OK] and [Up/Down]
key to switch “ON /Off”
by control of 12V power supply. When this item switches
to “On”, receiver will receive signal from 12V port. If the
item switches to “Off”, the receiver will receive all signals
from 0V
10.1.5 Tone burst mode
In “Tone burst” item, you can press [OK] and [Up/Down]
key to switch “None/ Tone burst A/ Tone burst B”
functions.
10.1.6 DiSEqC
DiSEqC: You can press [OK] and [Up/ Down] key to
switch options. There are several options for your
selection
:
1)
A, B, C, D: 4 ports DiSEqC 1.0
2)
1, 2,….16: 16 ports DiSEqC 1.1
