User Manual
Menu Operations
27
network operators provide account and password,
then enter “Start” to get the IP address.
3)
Press [Menu] key to save and exit.
11.3.2 Wifi Network
1)
Select
Wifi Network
on
Default Network Type
item.
2)
When you insert the wifi dongle, the screen will
display a message like “[wifi] device plug in” after
about 5 seconds.
3)
Select “config” menu the wireless LAN network list
will appear, Select you Wi-Fi network and press
[ok] key, at last input password. Select Link menu
to connect to the wireless LAN network. if you have
wireless LAN network no found ,you can press
[green] key to add by manual:
SSID
: The network name.
Network type
: Press [OK] key and [up/down] key
to select AD-Hoc or infrastructure
Encryption
: Press [OK] key and [up/down] key to
select No Security, WEP-64bit ASCII and
WEP-64bit HEX etc.
Password
: Press [ok] key to input the password.
Auto Link
: When you select this menu, if the wifi
dongle connect to a network successful and then
remove the wifi dongle, it will connect to the same
network automatically when you insert the same
wifi dongle again.
4)
Press [red] key to refresh the AP list.
5)
Press [yellow] key to Disconnect.
6)
Press [menu] key return to Ethernet setting menu.
11.3.3 3G Network
1)
Select
3G Network
on
Default Network Type
item.
2)
When you inset the 3G dongle, the screen will
display a message like “3G Device plug in “after 10
seconds.
3)
You can select auto mode and press [blue] key to
connect to network.
4)
If you have the specification of the 3G dongle, you
can select manual mode to setting by yourself.
Press [red] key to add the Area, operator and APN.
Press [green] key to modify the Area, operator and
APN, press [yellow] key to delete the Area,
operator and APN. Press [blue] key to connect to
network or disconnect the network.
11.3.4 Ping Test
This function is for checking the network connection
status, you can input IP address which you want to
check and enter Start to run the IP ping function.