User Manual
Menu Operations
23
10.1.7 Motor Setting
Motor Setting
：
In “Motor Setting” item, you can press
[OK] and [Up/ Down] key to switch “Disable / DiSEqC
1.2 / USALS” functions.
10.1.8 Polarity
In Satellite item, press [green] key to switch satellite list
and TP list , in TP list ,you can press [blue] key to add/
edit/ delete TP, this menu you can set polarity, in add
and edit menu press[Left/ Right]
key to switch “ H / V”
functions.
10.1.9 TP Edit
In TP list, when you press [blue] key, there will display
the screen like below:
1)
You can use [up/down] and [OK] key to Add /Edit
/Delete transponder.
When you select “Add transponder”, it will display
“Add Transponder” in screen; you should set the
parameters of “TP Frequency”, “Symbol Rate” and
polarization, for this new transponder. The
parameters of “TP Frequency” and “Symbol Rate”
can set by number keys. The available range are
“3000~13450 MHz” and “1000~45000Ks/s”.
When you select “Edit transponder’, there will
covered by the original transponder, and show up
a new transponder, the parameters range is the
same like add transponder.
When you select ‘Delete transponder, there will
pop a warning dialog for reminding whether you
will save change? If you select “Yes”, these
transponders will be deleted.
When you select “ Delete All”, there will pop a
warning dialog for reminding whether you will save
change? If you select “Yes”, all transponder will be
deleted from the current satellite.
2)
When you complete your modification, Press [Red]
key, it will show up a dialog to ask you setting the
parameters: Network Search, channel type, scan
mode and scan type. After you set up, press [OK]
key to start scanning.
3)
In this item, press [menu] key to exit the scanning
and save the current parameters.
10.1.10
Single Scan
Press [Red] key, it will show up a dialog to ask you scan
mode (means you want to scan all channels or only scan
free channels), channel type (means you want to scan
all channels or only scan TV/Radio channels), scan type
(means Manual scan, that is searching the existed TP.
blind scan means It is no need existed TP info) and NIT
Search on/off. After you set up, press [OK] key to start
scanning.
10.1.11 TP Scan
In TP list item, Press [OK] key to select TP and press
[red] key to scan current TP’s programs.
