APSS: Auto song searching
* At anytime while
Side-A
of the cassette is playing: Pressing “16” will
search for the next song or pressing “13” will search for the beginning of the
same song. However, the system will search for the previous song if “13” is
pressed within 10 seconds after a song begins to play. If “13” is pressed
right after “16” is chosen to search for the next song, the APSS function will
be cancelled and the system will enter the REW mode.
At anytime while
Side-B
of a cassette is playing: Pressing “16” will search
for the beginning of the same song or pressing “13” will search for the next
song. However, the system will search for the previous song if “16” is
pressed within 10 seconds after a song begins to play. If “16” is pressed
right after “13” is chosen to search for the next song, the APSS function will
be cancelled and the system will enter the FF mode.
TAPE RECORDING:
l
Connect the line level output of the source device, of which you wish to
record, to the stereo RCA REC IN jacks on the RM2 rear panel.
l
Insert a blank cassette into the tape slot “1”.
l
Press “12” once to enter “Record Standby” and “6” will be lit. For Side-A
recording press “15”, and indicator “7” will be lit as well. For Side-B
recording press “14” and indicator “8” will be lit as well. When recording,
all function keys are disabled except for “12” and “18”.
l
Press “11” to set the recording mode. 2 modes are available:
One Way Auto Stop
(records on side-A only, or side-B only. The unit will
stop automatically when reaching the end of the side.)
Two Way Auto Stop
(records on side-A first and continues to side-B. The
unit will stop automatically at the end of Side-B.)
Auto Reverse
is not available in record mode. If selected, it will function
the same as Two Way Auto stop.
* Press “12” again while recording to pause. When paused, all function
keys are disabled except for “14”, “15”, and “18”. Press “14” or “15” to
resume the recording in the original recording direction. During
recording, “10” will count in an ascending direction.
POWER OFF
l
Pressing “2” at any time during play or record will stop the function,
cause the cassette to eject, and then switch off the power source.
Summary of Contents for RM2
Page 1: ......
