HH76 and MBP76 Transmitter Status Display
Battery Status:
Battery Status Indicators for both the Handheld and Bodypack Transmitters
feature Four Level Displays as shown in
.
Group and Channel Display:
After completing the ASC, both the Handheld and Bodypack Transmitters
will display the Group and Channel numbers selected as shown in
.
Normal Display:
Both Handheld and Bodypack Transmitters will display Group and Channel
numbers as well as Battery Status as shown in
.
1
2
3
Group and Channel Selection:
Press “SET” button twice, “GROUP SELECT”
will display, press or to choose the appropriate frequency group, as
shown on the left . Press “SET”again , “
MANUAL CHANNEL SELECT”
will display
, press or to choose the appropriate channel, as
shown on the left .
For best results when operating multiple systems, set all systems to
a single group, then set each system to a unique channel within that
group.
Auto Frequency Finder function on the Receiver:
Choose “AUTO CHANNEL SELECT” by pressing “SET” once,
then press
or
.
Receiver will automatically find a clear
frequency with no interference as
shown on the left .
Receiver Volume Setting:
The receiver has an electronic volume control. Press or
from the normal display (00 to 63), as shown on the left .
Normal Display:
Frequency and Antenna A/B (RF Received) as left .
Place the Transmitter “IR” window to face the Receiver “IR” window.
Then press the “ASC” button on the desired Receiver. The Transmitter
will automatically match the Receiver frequency.
Attention:
The distance between the Receiver and Transmitter
IR windows should be less than 0.5m during the ASC IR setup. When
setting up multiple Transmitters/Receivers, activate the ASC function
of only one Transmitter and Receiver at a time.
