background image

Operating Manual for AS-QUAD Series

**Please visit 

 for the latest updates**

www.galaxyaudio.com

Introduction

1

    

 Thank you for purchasing the Galaxy Audio AS-QUAD 

System. This manual covers the complete functions and 
operation of the QUAD as well as the optional transmitters. 
Please read this manual carefully to use the Quad to its 
fullest potential. The Quad is a single space rack mount 
receiver chassis, which may be loaded with up to 4 UHF 
diversity wireless mic receivers. Each of the receivers 
features an LCD display, 96 selectable channels, RF/AF 
indicators, and volume control. The chassis has an 
individual balanced XLR output for each receiver, and a 
mix output (balanced XLR and unbalanced ¼” jacks) with a 
Hi/Low level switch. The mix output provides a mixed 
signal from all of the receivers, based on the individual 
volume control settings. This mix output is very useful 
when main mixer input channels are in short supply. The 
internal antenna distribution system allows the 2 
detachable antennas to serve all of the receivers. In 
addition, the Quad chassis provides power to all 4 
receivers while occupying only 1 AC outlet.

There are multiple transmitter options for the Quad 
receivers. Choose between Dynamic or Condenser 
Handheld Microphones or a Body Pack transmitter (with 
multiple Headset & Lav options). Each transmitter features 
an LCD display showing channel number, frequency, and 
battery level. All transmitters feature a mute switch and run 
off of 2AA batteries (can be rechargeable).

Front Panel / Mic Receiver Module

Rear Panel

UN-BAL

ANT.B

ANT.A

LOW/HI

DC INPUT
12~15V/2A

MIXER      

AF OUT 

BAL. 

CH.D

CH.C

CH.B

CH.A

1. LCD Display                          
2. A/B Diversity Indicator
3. RF Indicator
4. AF Level Indicator
5. Channel Set
6. Channel Selector
7. Module Power Switch & Mic Volume
8. Main QUAD Power Switch

9. Antenna B Connector
10. Unbalanced ¼” Mix Output
11. Mix Output Level Switch
12. Balanced XLR Mix Output
13. Module Ch. D Output
14. Module Ch. C Output
15. Module Ch. B Output
16. Module Ch. A Output
17. 12v DC Power Input  
18. Antenna A Connector

(8)

(2)

(1)

(3)(4) (5)

(6) (7)

(10)

(9)

(11)

(12)

(13)

(14)

(15)

(16)

(17)

(18)

2

Summary of Contents for Any Spot QUAD

























Reviews: