PRODUCT DESCRIPTION
2
AS-HH5
AS-HH5
Handheld Microphone
The AS-HH5 is equipped with a uni-directional dynamic cartridge.
Power is supplied by two 1.5V AA size batteries.
1. Grille:
Protects the microphone cartridge
and helps reduce breath sounds and wind
noise.
2. Low Battery LED:
LED indicates battery status. Switching the power to "ON” causes
the LED to flash once and then go out indicating that the batteries have sufficient
power. If the LED stays on, it indicates that the batteries have insufficient power and
should be changed soon. If the status LED fails to flash, the batteries are either dead
or not positioned correctly, and you should correct the positioning or charge or replace
the batteries
3. On/off Switch:
Turns transmitter power on and off.
4. Battery Compartment:
Insert two AA batteries into the compartment and make sure
that the polarity of the batteries is correct.
5. Group Selector:
Changes transmitter group setting. (for 8 selectable frequency
groups)
6. Channel Selector:
Changes transmitter channel setting. (for 8 selectable frequency
channels within each frequency group)
7. Battery Cover:
Slide the battery cover down to expose the battery compartment
and the Group/Channel selectors.
8. Charging Input:
If rechargeable batteries are used, they can be charged by using
the optional DC charger AS-DCC. Charging can take up to 10 hours.
1
2
3
4
5
6
7
8
