- 14 -
12.6. Programming the firing channel of "Profi" devices
By pressing the firing keys 1-6 a programming command with firing channel information in the range of
1-6 can be sent to devices of the Profi series. This function is identical to the programming button in
the manual firing mode of the PFC Advanced. By doing so e.g. the firing channel of the PFE Profi Midi
1 Output can be programmed with the PFS Pocket.
12.7. Leaving the submenu "Special functions" and displaying the firmware version
To return to "normal" mode, again press the "On/Off" button. The PFS Pocket will exit the submenu
and return to normal mode.
When doing so the device indicates the firmware version by flashing LEDs in the battery indicator.
First the first digit of the version is displayed. With V1.3, the lowest LED lights up briefly. This
corresponds to 0001 binary and this again equals 1 decimal. Then the two lower LEDs light up briefly
for the second digit of the version number. This is 0011 binary and this corresponds to 3 decimal. The
version number 1.3 results from the values 1 and 3.
13. Radio range
The radio range depends a lot upon environmental conditions. With an uninterrupted line of sight the
radio range of this device is approx. 800 m.
14. Maintenance
In general the PFS Pocket does not need any specific maintenance when used thoroughly. However
we recommend sending the device back to the manufacturer every 1 to 2 years for a general check of
all device functions.
15. Warranty
The warranty period is 24 months.
If there is any defect during this period please pack the device properly and send it to the
manufacturer with carriage paid to have it repaired free of charge. Please do not forget to attach a
description of the symptoms that have occurred. Warranty is invalid if the device has been damaged
due to misuse, or abuse.
16. Protection against moisture and humidity
This device is not waterproof. Always protect it from moisture, humidity and water.
Summary of Contents for PYROTEC PFS Pocket
Page 8: ...8...
