SERVICE INSTRUCTION
S
E
R
V
IC
E I
N
S
T
R
U
C
T
IO
N
14
Care and Cleaning
You must DISCONNECT the appliance from the electricity
supply, before you can carry out any cleaning or maintenance
work.
Don’t clean the dryer by directly spraying water onto the dryer.
Don’t clean the dryer with benzene, thinner, alcohol, or acetone.
Otherwise, it may cause discoloration, deformation, damage.
electric shock or fire.
When cleaning the product , be sure to unplug the power cord.
During the drying cycle, the control panel or the door may
accumulate moisture.
Control Panel
Clean with a soft, damp clothes .Do not use abrasive substances.
Don’t spray cleaners directly on the panel.
The control panel finish may be damaged by some laundry pre-
treatment soil and stain remover products.
Apply such products away from your dryer and wipe up any spills
or over spray immediately.
Stainless Steel Tumbler
To clean the stainless steel tumbler, use a damp cloth with a
mild, non-abrasive cleaner
Remove the cleaner residue and dry with a clean cloth.
suitable for stainless steel surfaces.
Cleaning the Door
Clean periodically the interior part of the door to
remove any fluff. Accurate cleaning
correct drying.
ensures
The enter dryer has a high-gloss finish. Clean with a soft, damp
cloth. Don’t use abrasive
Protect the surface from sharp objects as they may scratch or
damage the finish.
Don’t place any heavy or sharp objects or a detergent box on
the dryer. Keep them on the purchased pedestal or in a
separate storage box.
substances.
Dryer Exterior
Warning
Do Not Use The Appliance Without Filter.
Open the loading door.
Remove the lint filter by putting it up and
open the lint filter.
Clean lint, fibre, and cotton raveling by hand
or with a soft piece of cloth.
Close the lint filter and place it back into its
housing.
A layer can build up on the filter pores that can cause clogging
of the filter after using the dryer for a while .Wash the lint filter
with warm water to remove the layer that builds up on the lint
filter surface .Dry the lint filter completely before reinstalling it.
The lint trap has to be cleaned frequently.
Cleaning The Filter
Filter case
Clean the inner surface of the strainer and
charging door after each drying.
Warning
Water Container Emptied
Water container collects all of the water from condenser. Water
container need to be emptied
after every drying cycle. If the
