16
To cancel: In child lock mode, press and hold LOCK/TURNTABLE OFF button more than 3 seconds, the
indicator light will come off.
T
URNTABLE
During cooking, the turntable works by default. You can turn the turntable on or off by pressing
LOCK/TURNTABLE OFF button.
NOTE:
Sometimes the turntable may become too hot to press. Be careful to touch the turntable.
F
AILURE DIAGNOSE
Failures
Possible reasons
An error sign "Er10"display.
High temperature alarm.
An error sign "Er11" display.
Low temperature alarm.
An error sign "Er12" display.
Open circuit alarm.
An error sign "Er13" display.
Short circuit alarm.
An error sign "Er30" display.
Inverter failure.
An error sign "Er40" display.
Inverter input under voltage.
An error sign "Er41" display.
Inverter input over voltage.
An error sign "Er42" display.
Over current protection.
An error sign "Er43" display.
Over temperature protection.
An error sign "Er44" display.
Magnetron fault.
An error sign "Er45" display.
Surge protection.
An error sign "Er46" display.
High voltage fault.
An error sign "Er47" display.
Switch tube fault.
An error sign "Er48" display.
Communication fault.
An error sign "Er49" display.
Auxiliary power supply.
An error sign "Er60" display.
Sensor fault, open circuit or short circuit.
An error sign "Er61" display.
Sensors selection is out of range.
An error sign "Er81" display.
Displayer communication transmission fault.
An error sign "Er82" display.
Displayer communication receiving fault.
NOTE:
For "Er10 ~ Er13", the display shows the code and continues to beep, after pressing
STOP/CANCEL button, the system comes back to normal standby mode.
