gala gar GAR CUT 2500, Technical Instruction Manual

Page: 15 / 30

GAR CUT (V. INDUSTRIAL). Instructions Manual 15
CHAPTER 1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.
The cutting function of the GAR CUT (V. Industrial Electrónica) machines is carried out by electric plasma
blown with compressed air. They can cut all kinds of electricity conductor material: Steel, stainless steel,
aluminium, brass, etc. The control of the plasma arc power in these equipments is conducted electronically.
The adjustment of the cutting capacity is continuous and conducted by a potentiometer. This equipment has an
antipollution system that means that the fan will only start up when necessary.
Maximum cutting thicknesses. Orientation data.
MAXIMUM RECOMMENDED LIMIT THICKNESS
MATERIAL
CUT
2500
CUT
4000
CUT
5000
CUT
2500
CUT
4000
CUT
5000
SOFT STEEL 20 mm 35 mm 35 mm 25 mm 40 mm 50 mm
STAINLESS STEEL 20 mm 35 mm 35 mm 25 mm 40 mm 50 mm
ALUMINIUM 16 mm 25 mm 25 mm 20 mm 30 mm 35 mm
A Euro-connector is located on the front of the equipment which enable you a quick connection of welding
torch supplied. The following are supplied with the equipment:
Cutting torch P-150, CE security system, protection goggles and connection earth cable.
For use of any other accessory check with the manufacturer.
This equipment has protection against: overheating, lack of pressure in pneumatic circuit, overloads in the
control circuit, contacts with dangerous voltages during the replacement of torch head components and
protection against cutting without earth return.
Main technical characteristics. (EN 60974)
TECHNICAL CHARACTERISTICS.
GAR CUT 2500
Ref. 454.00.000
GAR CUT 4000
Ref. 456.00.000
GAR CUT 5000
Ref. 456.84.000
Supply voltage (U
1
–3Ph 50/60 Hz)
230/400 V 230/400 V 230/400 V
Maximum primary intensity (I
1max
)
51/ 30 A 84/ 50 A 97/ 56 A
Primary effective intensity (I
1eff
)
40/ 23 A 53/ 32 A 53/ 32 A
Plasmagen gas
AIR AIR AIR
Operating air pressure
5,5-6 bar 5,5-6 bar 5,5-6 bar
Flowrate
175-210 l/min 175-210 l/min 175-210 l/min
Rated cutting intensity
55 A (100%) 80 A (100%) 80 A (100%)
Power range adjustment
20
÷
75 A (60%) 20
÷
130 A (40%) 20
÷
150 A (30%)
Cutting thickness up to (Ordinary steel)
25 mm 40 mm 50 mm
Ventilation
FORCED
Antipollution system
FORCED
Antipollution system
FORCED
Antipollution system
Weight
135 KG. 175 KG. 175 KG.
RUEDA MOVIL RUEDA FIJA
IP 21
CL. H (180º C)