Chapter
5
Appendix
29
Upgrading firmware
1. Put the firmware issued by the manufacturer to store in
SD card.
2. Insert the SD card into the TV box before you power on it.
Then reboot to automatically update, and the status indicator
will blink in red.
3. After the upgrade is complete, the status indicator will not
blink. And the TV box will boot into the Home screen, then
you must eject the SD card and remove the upgrade folder,
otherwise next time you will boot into re-upgrading status.
Maintenance
•
If TV box does get wet, turn off TV box immediately.
Wait for TV box to dry completely before turning on
again.
•
Clean the unit with a soft and dry cloth; be careful not to
wipe it with anything abrasive.
•
Never use alcohol, benzene, thinner, cleaning fluid or
other chemicals. Don’t use compressed air to remove
dust.
•
If TV box needs service, please consult the authorized
dealer through the contact information provided in the
warranty card. Faulty service may void the warranty.
