Gait Up SA
EPFL Innovation Park, Bat C. CH-1015 Lausanne
www.gaitup.com
TVA CHE-145.136.760
User guide PhysiRun Lab - v1.1.1 Date: 06.05.2019
Copyright © 2018-2019, All Rights Reserved - Gait Up SA. CH-1015 Switzerland
4
1.
Running package content
2.
Get ready with the sensors
2.1 Charging sensors
Physilog
®
5 are charged via micro USB. Connect the USB cable delivered with the sensors.
Connect the other part to a computer or sector with an adaptor (voltage specification: 5V,
100 mA). Physilog
®
5 must be turned
off when charging. Don’t charge the Physilog
®
5 if the
temperature is not between 0 ° and 45 °C.
Low battery level is indicated by orange blinking during measurement or by 3 rapid red
blinks when you want to start a new measurement. If the Physilog
®
5 is completely
discharged, charge at least 30 minutes before using. Battery life estimation is available
when you pair the sensor to the GaitUp application (available on Apple Store and Google
Play Store).
2.2 Sensors Configuration
By default, sensors are configured for running analysis with the PhysiRun Lab.
Nevertheless if you encounter any problem during the analysis you can check the sensor
configuration with the Research Toolkit (Windows version/Mac version, User guide) in the
“Configuration” part. Select your sensors> “Load Config”> Change the configuration>
“Send Config”. Configuration for PhysiRun Lab is:
NOTE: Charging problem is indicated by a continuous red light and it could
damage the sensor. In this case try to charge your sensor on another charging
source.
