Gait Up SA
EPFL Innovation Park, Bat C. CH-1015 Lausanne
www.gaitup.com
TVA CHE-145.136.760
PhysiGait user manual v1.3.1 Date: 29.04.2019
Copyright © 2018, All Rights Reserved - Gait Up SA. CH-1015 Switzerland
4
3. Recording with Physilog
®
5 and the PhysiGait Live - details
3.1
Connection to mobile application
Each time you open the application from completely closed state you need to connect the
two Physilog
®
5 to the mobile device. Once they are connected you don't need to repeat this
procedure when switching between different parts of the application.
To connect Physilog
®
5 to the application for gait analysis, login with your user name (email
address) and password and enter the “Gait analysis” functions of the app. Allow Bluetooth
to be turned on the device and establish a connection to the internet. There is no need to
pair your Physilog® with the tablet prior to Bluetooth communication.
C
lick on the “Available Physilogs” refresh button below the picture of
the Physilog
®
5 on the left of the screen of the application to look for
available sensors. Chose two Physilog® from the list and click on the
“Connect” button beside the sensor name. The name of the sensor
contains the number which is written on the back of the Physilog®5.
Troubleshoot:
If a sensor is not detected by the tablet, shortly press
the main button of the sensor to enter detection mode. If the sensor can still not be
connected, check that it has enough battery and is not connected to another mobile device
and if necessary ultimately do a reset of the sensor as explained in section 4.4 Troubleshoot.
If the sensor has incompatible firmware version for using with the app, the app displays an
error message and automatically disconnects from the sensor. If the sensor is blinking after
disconnection, you need to do a soft reset of the sensor (see section 4.4 Troubleshoot).
Physilog5 user manual explains how to update firmware.
When the sensors are connected the button changes to “Disconnect”
and a green dot appears besides the sensor name. You can see a
battery level estimation for each sensor below the battery symbol and
you can check if the sensor is measuring correctly by displaying the
raw data inside the Signals Visualizer part of the app.
For devices with small screen (such as smart phones), the sensor
connection screen is available after clicking on the image of
