3G Gate Opener 8/17
Revision V1.3B, Jan 2020
7. OPERATION
Programming of the telephone numbers in and whenever the unit
receives a call will recognize an
authorized telephone number calling it and will then reject the call without answering (so there will be no
charge) and open the gate or door. The relay can also be temporarily or permanently switched on or off by
sending SMS or dialing in.
This 3G Opener can allow user to gain access from their mobile phone by two methods
1. Caller ID recognition
2. by access control password mode
1. Caller ID recognition to open
Ring in to open the door with authorized telephone number.
2. Access control password to open
Dial the SIM card telephone number. The unit will answer the call and you will hear a bleep tone. The
door can be opened after enter correct password code. Or just simply send SMS password code to the
device.
*71*5678#
：
Trigger relay 1
*72*5678#
：
Hold relay 1
*73*5678#
：
Release relay 1
*74*5678#
：
Trigger relay 2
*75*5678#
：
Hold relay 2
*76*5678#
：
Release relay 2
*This is for door open option when telephone numbers not stored.
8.PROGRAMMING
Programming can be carried out either by text message or by dialing into the 3G Gate Opener.
8.1 Progrmming by dialing in
Dial the SIM card telephone number. The unit will answer the call and you will hear a bleep tone.
Enter Programming Mode by Pressing…..
*12*
1234
# (1234 is default password)
A successful pass code will produce a single long beep. A failed attempt will produce 3 short bleeps.
Example: start to program the phone number for dialing in to open the door.
Use the following commands to program the unit
* Insert international country code (1~3 digits):
71[country code] #
* Add a number (up to 1150 numbers):
72[relay][phone number] #
* Delete a number:
73[phone number] #
* Delete all numbers:
73*#
