GAINWISE TECHNOLOGY SS1603-01, Manual

Page: 19 / 25

SS1603-01 3G Audio Intercom (E1)
19
User commands to check system info & control relay via SMS
No. Function Command Reply
1 check signal strength *20# Signal Level 0~31 from poor to best
Service provide name, network
2 Check stored numbers
(dial in and dial out)
*21#
O [ number]…,I [ number]…..E (N)
O
：
call button numbers list
I
：
dial in to open numbers list
E
：
End
N
：
Next SMS
3 Check relay / detect status *22#
Relay 1[ status], Relay 2[ status],
Detect [ Input ], IN1 [ Input ]
Status: hold/ release/ trigger
Input: on/ off
4 Check detect SMS content *26*[ password ] # Default PWD 1234
Detect PIN Trigger
5 Check intercom move
detection SMS content
*27*[ password ] # Default PWD 1234
Case open
6 Check power loss
SMS content
*28*[ password ] # Default PWD 1234
Power loss
7 Check power active
SMS content
*29*[ password ] # Default PWD 1234
Power active
8 Check input 1 triggered
SMS content
*30*[ password ] # Default PWD 1234
IN1 trigger
9 Trigger relay 1 *33* [ password ] # Default PWD 5678
(Latch on when relay is on hold status)
10
Hold relay 1 *34* [ password ] # Default PWD 5678
11
Release relay 1 *35* [ password ] # Default PWD 5678
12 Trigger relay 2 *36* [ password ] # Default PWD 5678
13 Hold relay 2 *37* [ password ] # Default PWD 5678
14
Release relay 2 *38* [ password ] # Default PWD 5678
●
SMS data error
(Only 0~9
、
* are available)
SMS Data Error
●
Function code error Function Code Error