Solar Cascading Water Feature
K543
Instructions for Use
Please read and retain these instructions for future reference
v001: 08/11/21
Before using first time
Allow solar panel to charge for at least 8 hours in full sunlight with the ON/OFF switch in the ON position.
The ON/OFF switch is located under the solar panel. Once the batteries are fully charged, set the ON/OFF
switch to ON.
Find an ideal Place for the Solar Light.
Place the solar panel in an area where it will receive direct sunlight for at least 8 hours per day. The number
of hours the pump will work is directly proportional to the hours of sunlight it receives. If the solar panel is
placed in a shaded area, it will not be able to fully charge and its working time will be limited. Do not place
the solar panel near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the
light from coming on, or cause it to turn off automatically
To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden
stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first
then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the
ornament housing containing the actual LED light.
INSTALLATION:
1.
Attach the pump to the solar panel before use, plug the hose into the outlet of the pump.
Make sure the
water level covers the pump.
2.
Plug the power line of the pump into the plug of the solar panel, and then fasten.
3.
Position the solar panel in full sun to optimally run the pump, the backup battery will be charged from
the solar panel during normal operation and automatically run the pump without direct sunshine.
4.
If required the pump can be run by the battery in times of low sunlight. Turn on the switch located at the
back of the solar panel, if the battery is fully charged the pump will start to work immediately.
CHARGING AND OPERATION
Turn the switch, which is located under the solar panel, to “ON” position and the
battery will work automatically. Charge the solar product by placing it under direct
sunlight for at least 8 hours. Recommend longer charging time for the first use. If the
switch is “OFF” the battery will not work, solar panel ensures the pump works
directly.
The light will work automatically.
HOW TO USE:
The pump function will work best when fully charged under direct sunlight. When
there is no sun, the built-in batteries will power the fountain water and light for a minimum of a few hours.
Care and Maintenance Recommendations
•
Clean solar panel with a soft sponge every couple of weeks.
•
Make sure all connectors are still tight and no water getting in.
•
Keep the water clean during the summer keep topping up every 3 or 4 days with clean water.
