background image

Setup, Workout Tips and Care & Safety Guide

Please read before setting up or using your Balance Ball® Chair.

BALANCE BALL

®

 

CHAIR SYSTEM

TOOLS NEEDED

Balance Ball® pump (you may want to use a bicycle 

pump or compressor for initial inflation).

SETUP

1.   Remove the ball from packaging and inspect for 

shipping damage. It is normal for the ball to have  

slight creases or fold marks when first inflated. 

2.   Before inflating the ball, use a tape measure or 

ruler to mark 52cm or 21.5" on wall or floor, or 

place two objects approximately 52cm apart. 

This will be your guide for proper inflation size.

3.   Make sure that the ball is at room temperature 

before inflating.

4.   Using the supplied pump, insert it into the 

inflation hole in the ball. Inflate the Balance Ball® 

to the desired height and firmness. DO NOT 

overinflate.

5.   Remove pump from Balance Ball® and 

immediately insert plug into hole (so head is 

flush with surface of ball).

6.   Never inflate the ball larger than 52cm  

or 21.5" in diameter.

WORKOUT TIPS

1.   Follow exercise instructions presented in the 

program. 

2.   Always use the Balance Ball® Chair in an open 

area, free of furniture or other items that could 

get in the way while exercising.

3.   Use a smooth and steady motion when 

performing each exercise.

4.   Perform exercise routines to the best of your 

ability without strain.

5.  Avoid holding your breath while exercising.

CARE

1.   Clear workout area of sharp objects that may 

puncture the Balance Ball®. Use only on a  

smooth surface.

2.   It is not necessary to deflate the Balance Ball® 

after use; however, slight leakage may occur 

over time. Re-inflate when necessary.

3.   Hand wash the Balance Ball® Chair with a soft 

cloth and warm soapy water. Do not use harsh 

or abrasive chemicals or cleaning tools that may 

scratch or damage the Balance Ball® Chair.

4.   Always check the Balance Ball® for nicks or 

scratches before each use. If damaged in any 

way, do not use.

5.   Avoid placing or rolling the Balance Ball® on 

newspaper, photocopies or other materials 

printed in ink, as ink may permanently mark ball.

6.   Avoid exposing the Balance Ball® to rough, sharp 

or abrasive surfaces, or to heat or excessive 

sunlight. 

7.   Do not store the ball against painted or wood 

surfaces for any prolonged period of time.

IMPORTANT SAFETY CAUTIONS!

 

Please read before setting up or using the Balance 

Ball® Chair.

1.    Consult with your doctor before beginning this  

or any other exercise program.

2.   Perform exercises in a slow and controlled 

manner.

3.   Use the Balance Ball® Chair only on smooth 

surfaces. Do not use the Balance Ball® Chair if 

deep scratches or gouges exist. 

4.   Stop and rest if you feel dizzy or short  

of breath. 

5.   Use product only as demonstrated in the 

workout program.

6.   Please contact Gaiam for any product questions 

or regarding any defects. Manufacturer and 

distributor disclaim any liability, loss or damage 

caused by its use.

CAUTION: DO NOT place Balance Ball® in contact 

with woodwork, wood furniture or painted walls for 

any period of time. Damage to finish may occur.

INFLATION NOTICE

•  Inflate ball and plug.

•   Ball may not inflate to 100% of size on 

initial inflation.

•  Wait 24 hours.

•  Deflate 50% and inflate again.

•   Due to the ball’s material, the ball will 

increase to proper size with  
second inflation.

610-6002RTL_GA_KIT_BBallChair_CARE-18-6-15.indd   1

6/15/18   10:08 AM

Reviews: