24
Titan GSM
n => 3 Tone region
. Determines the frequency and cadence
used for progress tones:
x => 0 UK (default).
x => 1 Ireland.
x => 2 Netherlands.
n => 5 Call restrictions
:
x => 0 No restriction (default).
x => 1 Inhibit incoming calls.
x => 2 Inhibit outgoing calls.
x => 3 Inhibit incoming and outgoing calls.
n => 6 Call Timer
. Limit the duration of a call. When 30
seconds of restricted call time remains, a beep is heard in the
handset to warn the caller:
x => 0 to 120 minutes (default is 0, no restriction).
n => 7 Auto dial
. This configuration can be used for all models
but is specifically for use with the zero-button keypad phone to
enable the ‘Auto-dial on lifting the handset’ feature:
x => 0 Normal dialling that requires digits to be dialled
(default).
x => 1 Dials number stored in memory location 10, see
PNUM command (programming memory locations).
n => 8 Call progress announcement mode
. Instead of tones,
voice announcements may be played to suit the particular
condition of the phone. For example “We are unable to connect
your call, please try again later”. Note: This feature is an
additional option. It must be specified at the time of ordering.
x => 0 No announcement, only progress tones (default).
x => 1 Normal dial tone, then progress announcements.
x => 2 Prompt replaces dial tone then progress
announcements.
n => 12 Maximum dialled number length
. The maximum
number of digits to be accepted can be defined.
x => 1 to 20 (default is 20).
n => 15 Activate relay for ring indication
. One of the relays
may be used to activate an external sounder. The relays switch
at selected ring cadence.
x => 0 No action (default).
Summary of Contents for Titan GSM
Page 33: ...Titan GSM 33 11 CE Declaration...
Page 34: ...34 Titan GSM...
Page 35: ...Titan GSM 35...
