PHP400 GSM Help Point.
14
FUNCTION
ERROR
Meaning
Long/fast
Off
Incoming call.
On
Off
Call in progress.
Off
Long/Fast
SIM card is locked, PIN code
required. *
Long/fast
Long/Fast
SIM card is blocked, PUK code
required. *
Short/slow
Short/slow Weak signal.
Off
Short/slow
Insufficient power to operate, but
charging.
Off
On
Fault, such as no SIM.
On
On
Momentary indication to
acknowledge a press of the On/Off
button
* It is not possible to rectify these faults from the telephone itself. Please ensure that the SIM is not locked (or
blocked) prior to use.
5.9.
Switch on and test
1. Once the SIM card has been fitted and DC power connected, press and hold the
On/Off button located next to the power connector. The FUNCTION and ERROR
indicators will both light and will then go off, when this occurs release the button.
The FUNCTION indicator will flash rapidly to indicate that the phone is initialising
and is searching for a valid mobile network.
2. After several seconds, the FUNCTION indicator should flash less frequently to
indicate that a call may be made or received. If there is an error, for example no
SIM installed, the ERROR indicator will light. See the list above for a full list of
indicator conditions.
3. Using a mobile phone, send an SMS status command to the phone requesting
the current status. Use the following format for your outgoing message:
1234STAT
(where 1234 is the default PIN code.) The reply should be similar to the
following:
Signal: -93dBm
Vin:11.97V
Bat:0V
Temp
Now: 23
Min: 19
Max: 30
Humidity: 40%
Battery: Fault
Audio test: Pass
Ver: 1.0
IMEI: 359998042484305
4. If all is well with the status response, record the information for reference, to
compare with later status reports.
Summary of Contents for Help Point PHP400 GSM
Page 33: ...PHP400 GSM Help Point 33 ...
