29
CLRTEMP
Clears the maximum and minimum temperature memories (as a
result, they will initially show the current actual temperature).
CFGn=x
Read and write configuration setting.
n
ð
0
My number sending
. Determines whether the phone number
is declared to the destination being called:
x
ð
0
Use the setting defined by the network (default).
x
ð
1
Number is always sent (if supported by the network).
x
ð
2
Number is always withheld.
n
ð
1
Dial delay for models with a keypad
. Determines the delay
after dialling the last digit until the call is made:
x
ð
1
to
9
seconds (
default is
4
).
n
ð
2
Ring cadence
. Four different cadences available, which are
useful to differentiate between phones in close proximity:
x
ð
0
to
3
(
default is
1
)
Note: x=0 is silent, no ring.
n
ð
3
Tone region
. Determines the frequency and cadence used for
progress tones:
x
ð
0
UK (default).
x
ð
1
Ireland.
x
ð
2
Netherlands.
n
ð
4
TAPI voice compatibility
. Provides voice call dialling
compatibility with standard software (if connected to a computer):
x
ð
0
Disable TAPI compatibility (default).
x
ð
1
Enable TAPI compatibility.
n
ð
5
Call restrictions
:
x
ð
0
No restriction (default).
x
ð
1
Inhibit incoming calls.
x
ð
2
Inhibit outgoing calls.
x
ð
3
Inhibit incoming and outgoing calls.
n
ð
6
Call restrictions
. Limit the duration of a call. When 30
seconds of restricted call time remains, a beep is heard in the
handset to warn the caller:
x
ð
0
to
120
minutes (default is 0, no restriction).
n
ð
7
Auto dial
. This configuration can be used for all models but is
specifically for use with the zero-button keypad phone to enable the
‘Auto-dial on lifting the handset’ feature:
x
ð
0
Normal dialling that requires digits to be dialled (default).
x
ð
1
Dials number stored in memory location 10, see PNUM
command (programming memory locations).