GAI-Tronics Auteldac 5, Installation And User Manual

Page: 27 / 36

Auteldac 5 26
The headset interface of the Auteldac 5 has been certified as intrinsically
safe. Therefore, it is permissible to connect and disconnect the headset in a
hazardous area.
5 MAINTENANCE
The Auteldac 5 is based on highly reliable integrated circuits.
Under normal operation, the telephone is maintenance free.
5.1 Procedures
A programme of regular external visual inspection and cleaning is
recommended, with particular attention being paid to -
On all models:
•
Overall cleanliness of the telephone:
Wipe clean as necessary with a cloth dampened with clear water.
If heavily soiled, a little dishwashing liquid may be used in addition.
NOTE: high pressure hoses should not be used for cleaning.
•
Security of the installation on wall, pole or post.
•
Security and integrity of cable entries.
•
Security of the three body screws.
•
Cleanliness, integrity and condition of the handset:
Wipe clean as necessary with a cloth dampened with clear water,
and disinfect the handset.
Note that the handset has an anti-static coating – take care not to
damage this by excessive rubbing or the use of chemicals or
solvents (e.g. petroleum spirit). Do not allow liquid to penetrate the
earpiece or mouthpiece.
•
Security and condition of the handset cable.
On headset models, refer to headset manufacturer’s manual for
cleaning, hygiene and maintenance of headset.
5.2 Possible Operating Faults
The following operating and installation conditions could give rise to faults.
During installation, or in the event of a fault, please ensure that the following
do not occur:
•
Water ingress
•
Incorrect positioning of internal cables (Section 3.6)
•
Damage to any internal components
•
Overstressing of screws
•
Insecure fixing