GAI-Tronics ACC2500, User And Installation Manual

Page: 33 / 56

ACC2500 Audio Control Center Installation
29 09/08
PB4 – Keyboard Diagnostic
This function is accessible via Main Diagnostics, then Internal Diagnostic ( PB3 ) and verifies that the
keyboard is operating correctly. After entering the keyboard diagnostic mode, the display shows:
KEYBOARD TEST
KEYCODE:
XX
When any key is pressed (except TRANSMIT ), the corresponding keycode is displayed. Refer to the
keycode table that follows:
Button Keycode (Hex) Button Keycode (Hex)
0–9
00 - 09
PB1 – PB4
30 - 33
*
0e
ALERT
45
#
0f
PAGE
44
TRANSMIT
No code
(Will exit test.)
CLEAR
47
MONITOR
11
SELECT
46
TIME
13
DOWN
40
VOLUME
Down 20
UP
41
VOLUME
Up 21
Press
TRANSMIT to exit the keyboard diagnostic.
PB4 – Tone/Alarm Diagnostics
This function is accessible via Main Diagnostics mode select ( PB4 ), and allows adjustment of the levels of
sidetone ( PB1 ) and the DTMF tones ( PB2 ). The tone level adjust will display, then select PB1 , PB2 , or
PB3
.
•
The sidetone level used for speaker tones can be adjusted to suit the user.
•
The alert and page tone line levels can be adjusted relative to HLGT.
PB1 – Sidetone Level Adjust Mode
This mode allows the adjustment of the sidetone level to -15 dB in 3 dB steps:
Button(s) Sidetone Level Adjust Mode Function:
VOLUME
Up or
VOLUME Down
Increases/decreases the sidetone line level. Each time the
VOLUME
Up or
VOLUME
Down button is pressed, a beep is generated and the LCD display shows the new
setting.
TRANSMIT
Exits the sidetone level adjust mode and returns the unit to the tone level adjustment
screen.