Pub. 42004-195E
Model 491-204 Mine Dial/Page Telephone
Page:
5 of 9
f:\standard ioms - current release\42004 instr. manuals\42004-195e.doc
04/10
Most of the electronic circuitry is located on a single plug-in PCBA, GAI-Tronics Model 69491-401,
inside the Model 491-204 Station. The circuitry associated with keypad and sidetone adjustment is
located on a small PCBA behind the keypad (Model 69491-002). All these circuits operate from a single
12 V NEDA 926 lantern battery also contained within the station. These internal components are shown
in Figure 3.
Figure 3. Internal Components
For each Mine Dial/Page Telephone station, a GAI-Tronics Model 69001-001 Interface PCBA must be
used. This assembly is a plug-in printed circuit board measuring approximately 7.5
×
4.5 inches (190.5
×
114 mm) and must be mounted in a non-hazardous area within a Model 495-001 Mine Dial/Page
Telephone Interface Cabinet.
