Pub. 42004-449B
Model 210-001 Corridor Telephone
Page: 2 of 9
f:\standard ioms - current release\42004 instr. manuals\42004-449b.doc
06/11
•
Install a UL Listed lightning arrestor
on any phone installed where the phone or phone cable is at
risk of being exposed to lightning strikes. The lightning arrestor must be installed as close to the
phone as possible to maximize the protection. The lightning arrestor must not be installed within the
enclosure supplied with the phone.
•
NEVER touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
•
USE CAUTION when installing or modifying telephone lines.
•
Install UL Listed telephone line suppressor (customer-supplied) on the telephone line.
Installation
Mounting and Wiring Instructions
1.
Use a GAI-Tronics Model 233-001 Security Screwdriver to remove the four tamper-resistant cover
panel screws.
2.
Remove the front cover assembly to expose the four mounting holes on the mounting panel. These
holes accept #10-32 screws (customer provided). The length of these screws will depend on the
mounting surface. See Figure 2.
Figure 2. Mounting Details
