Inserting a capsule
• Push up the lever. The capsule holder will be
released and lowered slightly.
(Fig.10)
• Draw the capsule holder out of the coffee machine
(Fig.11).
• Insert the capsule into the capsule holder
(Fig.12)
The capsule must be intact. Do not pierce or open
the capsule!
• Re-introduce the capsule holder into the coffee
machine and pull down the lever completely.
Making coffee
• Place a cup in the middle of the drip tray grating right
under the spout of the capsule holder.
• Press the coffee selection button
(Fig.13).
• Once pressed, the coffee is being prepared. The
coffee will flow into the cup.
• Once the desired amount of coffee has been made,
press the coffee selection button again to stop the
process.
• Push up the lever.
• Remove the capsule holder and turn it upside down
to remove the used capsule.
What to do after
• If no more cups of coffee are needed, press the
ON/OFF switch to turn OFF the machine.
• Insert the capsule holder without pulling down the
lever. This way, the capsule holder will not weigh on
the machine.
Coffee selection buttons
Fig. 10
Fig. 11
Fig. 12
Fig. 13