CONCETTO
31/120
English
F. 9
10.4
Serial port connection
Through the serial port the machine can be connected to the
AUTHORIZED CUSTOMER SERVICE CENTER’s equipment, for
checks or programming operations (
A
- F. 9).
12 - USE OF THE MACHINE
Read carefully this brochure until you get a good
understanding of the machine, before starting to operate
it.
After a long time of machine inactivity, read the previous
paragraph
“First switching-on”
before re-operating
the machine.
11 - FIRST SWITCHING-ON
-
Fill the hopper (
6
) with the selected coffee beans blend.
Be sure the coffee does not contain foreign bodies which
could be dangerous for grinders.
-
Check if the removable components (
12
and
16
) are in the
right position and if the door (
14
) is closed.
If they are not, when the machine is switched-on, the display
will indicate which component is in the wrong position.
-
Turn the all-pole switch on “
I
”.
-
Switch on the machine through the switch (
18
);
the message
“WARMING UP”
will be displayed.
-
When the message
“READY FOR USE”
is displayed :
- Adjust the brew group (
26
and
27
) to obtain the suitable
height depending on the container used (Pr. 8.4).
- Place one or two containers under the brew group.
-
Select the beverage and press the corresponding button.
Although buttons are previously programmed on a
standard base, check your beverage has the selected
features. If not, they must be reprogrammed (Pr. 12.6).
Depending on the current regulations of the Country where
the machine operates, the cable connecting the electric
line has to be pre-set or equipped with an all-pole switch
(with a minimum contact opening of
3 mm
), (or with a
plug in accordance with the same regulations).
•
The all-pole switch has to be adequate to the machine
power consumption and must be able to intercept every
voltage polarity.
•
Check if the electric cables of the system are
proportioned to the machine power consumption.
The connection point (electric plug or all-pole switch) must
be located in an easily reachable place, in order to
disconnect the machine from the electric line in case of
need.
• Connect the cord (B - F. 6) to the electric network.
A
Summary of Contents for Concetto
