Gaggia Anima, Operating Instructions Manual, Page: 23 / 72

23
English
reinserting the Brew Group
1 Before reinserting the brew group into the machine, ensure the two
yellow reference indicators on the side coincide. If this is not the case,
perform the following step:
7 Switch the main power button to “1”. Press the Stand-by button.
8 Wait for the machine to perform an automatic rinse cycle.
9 Perform the “Brew Group Cleaning under Running Water” operation.
10 Remove the drip tray and the coffee grounds drawer. Empty them and
insert them in the machine again.
11 Press the
ArOMA STrENGTH
button and select pre-ground coffee.
12 Press the
ESprESSO LUNGO
button. The machine dispenses water from
the coffee dispensing spout.
13 Repeat steps 11 and 12 twice. Throw away dispensed water.
Ensure that the lever is in contact with the brew group base.
2 Ensure that the yellow locking hook of the brew group is in the right
position.
To correctly position the hook, push it upwards to the highest position.