14
ENGLISH
Adjusting the coffee length
The machine allows the amount of brewed espresso coffee to be adjusted
according to your taste and the size of your cups.
Each time the “
” or “
” button is pressed, the machine brews a pre-set
amount of coffee. Each button may be individually programmed for a specific brew
setting.
The following procedure describes the programming of the “
” button.
1
Place a cup under the dispensing spout.
2
Press and hold the “
” button. The “
” button and the “
” light flash
during this phase. Release the button: the machine is now in programming
mode.
The machine starts brewing coffee.
3
When the desired quantity of coffee is in the cup, press the “
” button.
Now the “
” button is programmed; each time it is pressed, the machine will
brew the same amount of espresso that was just pre-set.
Espresso and coffee brewing
Espresso and coffee brewing using coffee beans
Before brewing a coffee, check that both the water tank and the coffee bean
hopper are full.
1
Turn the aroma selector switch to select the desired aroma.
2
Place 1 or 2 cups under the dispensing spout.
Note:
To program the “
” coffee brew button, the same steps should be
followed. Press the “
” button to stop brewing when the desired amount of
coffee is reached.
4219-450-01931 MANUAL GAG. NAVIGLIO HD8749 EN-ES-PT.indd 14
03/12/2018 12:33:13
