
en
Troubleshooting
48
Fault
Cause and troubleshooting
Creasing.
The laundry lies in the drum for too long after drying.
1.
Remove the laundry from the drum as soon as the
drying programme has finished.
2.
Spread the items of laundry for cooling.
Easy Care fabrics have been dried for too long.
▶
Change or adjust the dryness level. →
The crease-reduction function is not activated.
▶
Activate the crease-reduction function. →
Water is leaking from
the appliance.
Appliance is not correctly aligned.
▶
Water outlet hose is not connected correctly.
▶
Check the installation of the water outlet hose.
→
Condensation collects
in the condensation
container despite the
water outlet hose be-
ing connected.
Not a fault. The remaining volume of condensation
may remain in the condensation container.
No action required.
Water outlet hose is not connected correctly.
▶
Check the installation of the water outlet hose.
→
Odours have formed
in the appliance.
Stubborn dirt in the appliance or an extended appli-
ance downtime of more than one month.
▶