Gaggenau VR414115 User Manual And Installation Instructions Download Page 8

en 

Cleaning and servicing

8

8  Cleaning and servicing

To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.

8.1 Cleaning products

You can obtain suitable cleaning products from after-
sales service or the online shop.

WARNING ‒ Risk of electric shock!

An ingress of moisture can cause an electric shock.

Do not use steam- or high-pressure cleaners to
clean the appliance.

WARNING ‒ Risk of burns!

The appliance becomes hot during operation.

Allow the appliance to cool down before cleaning.

ATTENTION!

Unsuitable cleaning products may damage the sur-
faces of the appliance.

Do not use harsh or abrasive detergents.

Do not use cleaning products with a high alcohol
content.

Do not use hard scouring pads or cleaning
sponges.

Only use glass cleaners, glass scrapers or stainless
steel care products if recommended in the cleaning
instructions for the relevant part.

Wash sponge cloths thoroughly before use.

8.2 Cleaning the appliance

Clean the appliance after each use so that residues do
not burn on. If residues are burnt on several times, it is
difficult to remove them. Do not scrape burnt-on
residues. Instead, soak appliance components with
burnt-on residues in water and a little washing-up liquid.

Requirement:

 The appliance has cooled down.

1.

Remove the wire rack.

2.

Swing the grill element upwards.

3.

Remove the lava stone trough and lava stones.

8.3 Cleaning the wire rack manually

1.

Use the cleaning brush to remove the worst of the
residue.

2.

Leave the wire rack to soak in the sink.

3.

Clean the wire rack with detergent solution and the
cleaning brush.

4.

Remove stubborn dirt using the grill cleaning gel.
→ 

"Cleaning the wire rack with the grill cleaning

gel", Page 8

5.

Dry the wire rack thoroughly.

Cleaning the wire rack with the grill cleaning gel

1.

Follow the instructions on the packaging for the grill
cleaning gel.

2.

Brush stubborn dirt with the grill cleaning gel.

3.

Leave the grill cleaning gel to work for at least
2 hours. In the case of heavy soiling, leave the grill
cleaning gel to work overnight.

4.

Rinse the grill cleaning gel thoroughly.

5.

Dry the wire rack thoroughly.

8.4 Cleaning the wire rack in the dishwasher

Clean the wire rack in the dishwasher.

Select a maximum temperature setting of 70 °C.

When cleaning in the dishwasher, the surfaces may
become lightly discoloured. This discolouration
does not affect their usability.

8.5 Cleaning the stainless steel tray

1.

Clean the stainless steel tray using soapy water and
a dish cloth.

2.

Leave stubborn dirt to soak, or remove it using the
stainless steel cleaner or the grill cleaning gel.

3.

Dry with a soft cloth.

8.6 Cleaning the lava stone tray

1.

Remove the lava stones.

Replace the black lava stones. Black lava stones
are saturated with fat, which may generate a lot
of smoke during operation. The fat may ignite.

2.

Clean the lava stone tray with detergent solution
and a washing-up brush.

3.

Leave stubborn dirt to soak or remove it using the
grill cleaning gel.

4.

Dry with a soft cloth.

8.7 Cleaning the grease drip tray

Clean the fat collecting tray in the dishwasher.

Select a maximum temperature setting of 70 °C.

8.8 Cleaning the cast roaster pan manually

1.

Use the cleaning brush to remove the worst of the
residue.

2.

Leave the cast roaster pan to soak in the sink.

3.

Clean the cast roaster pan with detergent solution
and the cleaning brush.

4.

Remove stubborn dirt using the grill cleaning gel. 
→ 

"Cleaning the cast roaster pan with the grill clean-

ing gel", Page 8

5.

Dry the cast roaster pan thoroughly.

Cleaning the cast roaster pan with the grill

cleaning gel

1.

Follow the instructions on the packaging for the grill
cleaning gel.

2.

Brush stubborn dirt with the grill cleaning gel.

3.

Leave the grill cleaning gel to work for at least
2 hours. In the case of heavy soiling, leave the grill
cleaning gel to work overnight.

4.

Rinse the grill cleaning gel thoroughly.

5.

Dry the cast roaster pan thoroughly.

8.9 Cleaning the cast roaster pan in the
dishwasher

Clean the cast roaster pan in the dishwasher.

Select a maximum temperature setting of 70 °C.

The surfaces of the cast roaster pan may become
lighter in the dishwasher. This discolouration does
not affect their usability.

Summary of Contents for VR414115





















Reviews: