Installation situation 3
(Fig. 15-17)
Worktop between 86 and 90 cm high
–
Saw out
the base plate in the built-in cabinet for
the fan module.
–
Place
the fan module in the base cabinet.
Refer to the operating instructions of the fan
module for details of how to install it.
–
Join
the pipe connection piece of the VL 051 with
the deflection piece to the fan module AS 090-051
via a flexible rectangular profile (AR 070-051).
Also use a deflection piece on the fan module.
– Now
lower
the hob ventilator into the worktop.
Make sure that the engaging lugs on the
appliance lie exactly on the clamping springs.
Press the appliance firmly into the worktop.
The engaging lugs on the appliance “snap" into
the clamping springs.
– At the front,
fix
the hob clamping element onto
the worktop from below until the appliance is
pressed on evenly (Fig. 17). If the worktop is
less than 36 mm thick, place the hob clamping
element under it.
–
Cut off
protruding sealing tape.
5750198290 en 09.01 SK
15
Fig. 17
min.
600
min. 900
min.
860
490
50
156
245
500
min.
560
872
195
365
Fig. 15
min.
600
min.
900
min.
860
AR 0
70-05
1
AS 0
90-05
1
GB
031
Fig. 16
