Gaggenau VI 482 103, Instruction Manual

Page: 20 / 36

20
en
Locking the control panel for cleaning
Setting procedure
Select the appropriate temperature level from the table.
Set an empty item of cookware down on the cooking
zone.
1 Use the control knob to select the temperature
setting you require. Temperature settings 1
to 5 are
available for this function; see temperature settings
table.
2 Touch the
Ú
symbol; it will be lit orange.
‘
and the temperature setting you have selected
will be lit.
The function has now been activated.
The
¬
,
«
or
ª
temperature indicator and the
temperature setting you have selected will remain lit
until the frying temperature has been reached. An
audible signal will then sound and the temperature
indicator will go out.
3 Once the frying temperature has been reached, add
the fat and then the food to the pan.
Notes
– If a temperature setting above 5 is selected,
setting
†
will automatically be set. In this case, turn
the control knob to position 5.
– Turn the food so that it does not burn.
Switching off the frying sensor
Turn the control knob that was used to select the
temperature to position 0. The hotplate will switch off
and the residual heat indicator will appear.
A
Locking the control panel for cleaning
Locking the control panel for cleaning
Wiping over the control panel while the hob is switched
on may alter the settings. To avoid doing this, you can
use the hob's "Lock control panel for cleaning" function.
To switch on: Touch the
−
symbol. An audible signal
will sound. The indicators for the active functions will
flash. The control panel will be locked for 10
minutes.
You will now be able to clean the surface of the control
panel without altering the settings.
To switch off: Touch the
−
symbol again within the next
10 minutes.
If the function is not deactivated within these
10
minutes, the hob will switch itself off.
Notes
– The locking function does not affect the control
knobs.The hob can be switched off at any time.
– While the locking function is active, the power
supply to the hob is disconnected. The hotplates
may still be hot.
b
Automatic safety switch-off function
Automatic safety switch-off function
For your protection, the appliance features a safety
switch-off function. Depending on which heat setting
has been selected, the hotplate's heating element will
be deactivated if no further action is performed within a
set time after selecting the heat setting.
An audible signal will indicate when this time has
elapsed. The control knob is active and the illuminated
ring around it will flash.
”‰
will be lit on the hotplate
display.
Turn the control knob to position 0. The appliance can
now be switched back on as usual.
Heat setting Deactivated after
‚
10 hours
ƒ
to
…
5 hours
†
to
ˆ
4 hours
‰
3 hours
Š
to
‚‹
2 hours
‚‚
to
‚ƒ
1 hour
Frying sensor temperature setting Deactivated after
‚
to
†
3 hours