Gaggenau VG 441-210, Operation, Maintenance And Installation Manual

Page: 21 / 28

Preparing the Cabinet • Cut out the recess for the hob in your worktop.
Proceed as indicated on the installation sketch.
The installation sketch contains the measurements
of the space required for the trim between the
appliances. Several appliances can also be
installed in individual recesses, as long as a
minimum clearance of 50 mm is kept to between
the appliances.
• As shown in the installation sketch, drill the
Ø 35 mm hole to secure the control knob in the
cabinet front.
• If the cabinet front is thicker than 26 mm, the front
must be routed from the back to max. 26 mm on
an area of 80 x 310 mm.
19
157
5
1170
360
45
380
490
min.
50
min. 35
180
510
130
8
765
1,4 m
123
35
60
–