Gaggenau VG 421 CA, Operation, Maintenance And Installation Manual

Page: 30 / 32

Fitting the Appliance Cover
• The securing brackets are already fitted on the
base.
• Place the appliance cover on the brackets in
upright position and screw it down using the
pre-mounted grub screws.
• Close the appliance cover. It must lie evenly on
the appliance.
• If the cover is not fitted straight, loosen the sheet
metal screws holding the securing brackets and
fit the included shims on the securing bracket
until the appliance cover lies evenly on the panel
edge.
• Again firmly screw down the appliance cover.
Note:
do not use the appliance cover as a surface for
placing objects or for keeping things warm. Wipe
away spills before opening the appliance cover.
Do not close the appliance cover until the
appliance has cooled down completely. Do not
operate the appliance with the cover closed! This
may damage the appliance and the cover due to
the development of heat.
28 9000030385 en 10.04 EB