16
Operating principle
The wok burner features three flame rings.
Pressing down the control knob activates the
ignition. The flame setting is infinitely variable
between high and low.
Operation
The markings on the control knob show the setting
between high and low heat. The flame setting is
infinitely variable between high and low heat.
Notes
‒
Only light a burner if all pan supports and
burner parts are properly assembled.
‒
Make sure the burners and ignition sparkers
are clean and dry.
‒
Fully press down the control knob and keep it
pressed, then turn it to the required position.
‒
After igniting, keep the control knob pressed
for around 2 to 4 seconds more. The thermal
sensor which controls the gas flow must be
heated before the knob can be released.
‒
If the flame should not ignite within 2 to 4
seconds, turn the control knob further to the
left to the low heat position and then back to
the high heat position after ignition. It is often
faster to ignite the burner in the low heat
position because the various gases have a
differing ignition response.
‒
Only use the recommended accessories. Do
not cover the stainless steel cooktop base
(e.g. with aluminium foil).
Switching on automatically
Your cooktop features ignition sparkers for
automatic ignition.
1
Place a suitable pot or pan on the
corresponding cooking position.
2
Fully press down the corresponding control
knob and turn it anticlockwise to the required
position. The burner lights automatically.
3
Keep the control knob pressed for a few
seconds after ignition.
The flame size can be set continuously between
high and low by slowly turning the control knob.
Switching on manually
During a power cut you can ignite the burners
manually.
1
Place a suitable pot or pan on the chosen
burner.
2
Press the corresponding control knob and turn
it anticlockwise to the required setting. Keep
the control knob pressed.
3
Use a gas lighter or a match to ignite the
burner. Keep the control knob pressed for a
few seconds after ignition.
Switching off
Turn the corresponding control knob clockwise to
the OFF position.
Thermoelectric flame monitoring
For your safety, this cooktop features
thermoelectric flame monitoring. This prevents
gas escaping, if a burner accidentally goes off
during use (for example from a draught).
Should a burner accidentally go off during use,
turn the control knob to the OFF position and wait
at least 30 seconds before re-igniting the burner.
2))
KLJKKHDW
ORZKHDW
