background image

10

Burnt-in residues

To remove stubborn, burnt-in residues you can order 
the grill cleaning gel (order number 463582) from your 
specialist retailer or from our after-sales service. You 
can use it to clean the pan supports, the burner parts 
and the stainless steel cooktop base. If necessary 
apply the gel and leave overnight. Please observe the 
manufacturer’s instructions.

Do not use these cleaning agents

Scouring or chemically aggressive cleaners

Acidic cleaners (e.g. vinegar, citric acid, etc)

Cleaners containing chlorine or with a high 
content of alcohol

Oven cleaner

Hard and scratchy sponges, brushes or scouring 
pads

Thoroughly wash out new sponge cloths before 
using them.

Part/surface

Recommended cleaning method

Stainless steel 
surfaces

Clean with a soft cloth and some soapy 
water; polish dry with a soft cloth. Do not 
use too much water to avoid water enter-
ing the appliance.

To remove stubborn residues or discol-
ouration because of the heat, you can 
order a stainless-steel cleaner (order 
number 311298) from your specialist 
retailer or our after-sales service.

Pan support

Carefully take off pan supports for clean-
ing. Soak in soapy water. Clean with a 
brush and some detergent.

Be careful when cleaning around the 
rubber rests to ensure they do not come 
loose.

Rinse with clear water. Carefully dry pan 
support before assembly. 

Do not clean in a dishwasher!

Burner lid, 
burner ring, 
burner head

Take burner parts off for cleaning. Clean 
in soapy water with a cloth and deter-
gent. Use brass polish to retain the origi-
nal shiny surface of the burner ring and 
the burner lid.

Port openings of the burner ring must be 
kept free.

Do not clean in a dishwasher!

Control panel

Clean with a soft, moist cloth and some 
soapy water; do not use too much water. 
Dry with a soft cloth.

Immediately remove residues of food 
containing acid from the control panel 
(e. g. vinegar, ketchup, mustard, mari-
nade).

You can order a suitable care product for 
the control panel (order number 311135) 
from your specialist retailer or online. 
Apply the care product evenly with a soft 
cloth on the control panel after cleaning.

Control knobs

Clean with a soft, moist cloth and some 
soapy water; do not use too much water.

Caution! 

Damage to the appliance: Do 

not pull off the control knobs to clean 
them.

Summary of Contents for VG 231 334 SG













Reviews: