10
en-us
Installation Procedure
Installation Procedure
Installation Procedure
Prepare Installation Space
Prepare Installation Space
The kitchen unit must be heat-resistant to at least 200° F
(90°C). The stability of the unit must be maintained after
producing the cut-out.
Create the cut-out in the countertop for one or several
Vario appliances according to the installation diagram.
The angle of the cut surface to the countertop must be
90°.
After creating cut-out, remove shavings. Seal cut
surfaces in a heat-resistant manner.
Some solid surface countertops require special
installations. For example, heat reflective tape and
rounded corners may be necessary. Contact the
countertop manufacturer for instructions specific to your
countertop.
Observe minimum distance between appliance underside
and furniture parts of
3
/
8
" (10 mm).
To improve flame stability, we recommend installing an
intermediate floor underneath the appliance in the
installation cabinet.
When installing multiple Vario appliances:
Take into account
spacerequirement for VV 200 connection strip between
the appliances.Appliances can also be installed in
individual cut-outs, bearingin mind a minimum distance
between the appliances of 1
9
/
16
" (40 mm).
Install Appliance
9
WARNING
Before you plug in an electrical cord or turn on
power supply, make sure all controls are in the OFF
position.
1.
Secure the appliance cover VD 200 020 (available
separately as special accessories) before fitting on
the appliance (see installation instructions
VD 200 020).
2.
Insert appliance evenly into the cutout. Push it firmly
into the cutout from above.
Note:
The appliance must be firmly fixed in the cutout
and must not be able to move around (e.g. during
cleaning). If the width of the cutout is at the upper
tolerance limit, fasten the ledges at the sides in the
cutout if necessary.