24
11.
Sliding the appliance into the installation niche
m
Warning
Be careful when sliding the appliance into the
installation niche. Take care not to damage the water
pipe or power cable that you have fixed to the floor.
Note:
If the floor or appliance is skew in relation to the installation
niche, the height-adjustable wheels should be correspon-
dingly adjusted before sliding the appliance into the niche.
z
Plug the mains plug into the socket.
Note:
A separate plug is necessary for each appliance
in the case of Side-by-Side set up!
z
Protect the mains lead from getting wedged under
or behind the appliance.
Recommended procedure:
Tie a rope onto the middle of the mains lead and slide
the appliance forwards. Pull the cable onto the rope
when sliding the appliance into the niche.
or
Fasten the mains lead onto the floor with adhesive
tape, in the middle behind the appliance approx.
38 cm from the rear of the niche.
z
Slide the appliance carefully into the niche until
the height-adjustable wheels grip into the anti-tilt
mechanism.
z
Remove the edge protector of the installation niche.
