30
x
Fault
Possible cause
Remedial action
The refrigerating unit
is switching on more
frequently and for longer.
Appliance opened frequently.
Do not open the appliance unnecessarily.
The ventilation openings have been
covered.
Remove obstacles.
Appliance has no
refrigeration capacity.
The light does not work.
The display does not
illuminate.
Appliance has been switched off.
Press the On/Off button.
Power failure.
Check whether the power is on.
The fuse has been switched off.
Check the fuse.
The mains plug has not been inserted
properly.
Check whether the mains plug is secure.
The cool-fresh compartment
is too warm or too cold.
The fixed setting has been set too high
or too low (e.g. if there is frost
in the “cool-fresh” compartment).
The temperature in the cool-fresh compartment can
be set warmer and/or colder.
Setting the temperature:
1. Switch off the appliance with the On/Off
button 1.
2. Simultaneously hold down On/Off button 1
and temperature setting button 2 for
approx. 2 seconds. “88” is lit on temperature
display 4. When the temperature display goes
out, release buttons.
3. The temperature levels appear
on the temperature display 4.
Temperature levels:
▯
Setting 0 – coldest setting
▯
Setting 6 – warmest setting
▯
Setting 4 – factory setting (almost 0 °C)
4. Keep pressing temperature setting button 2 until
the required temperature level is displayed.
The set temperature is saved after one minute. The
display switches to the set refrigerator compartment
temperature.
Notes
▯
The numbers on the display do not correspond
to °C temperatures in the “cool-fresh”
compartment.
▯
If the temperature display is not flashing,
the buttons were inadvertently pressed
for longer. Switch off the appliance again and
repeat the process as described above.
