Connecting the appliance
Gas connection
The gas connection must be in a location that
permits access to the shut-off valve and which,
if applicable, is visible after opening the door of
the cabinet.
By means of the included R 1/2 ´ ´ BSP Male
connection (on the appliance end) with the
affiliated washer, the appliance must be connected
to a fixed connecting line.
Electrical connection
Electrical connection (A
C 220-240 V) is established
by means of a connecting cable with an earthing
contact plug connected to an earthed socket, which
must also be accessible after installation of the gas
hob.
When establishing connections, make sure that the
connecting lead cannot come into contact with hot
parts of the gas hob or other hot parts.
Turn all control knobs to the OFF position before
connecting the appliance to the power supply.
Connection type Y
:
if damaged, the mains cable
must be replaced by a special mains connecting
cable. The mains connecting cable must only be
connected by the manufacturer or the manufac-
turer's after-sales service.
24
105
28
1
/
2
"
50
max.
