Gaggenau EB 388 610, Use And Care Manual

Page: 14 / 24

14
Correcting an input :
Press the
M
key. Within 10 seconds, correct the time
value with the
@
and
A
keys. Confirm input with the
~
key. To clear an input, press the
@
and
A
keys at the
same time.
End of cooking time
With this function you can move the end of the set
cooking time to a later point in time.
To do this, enter the cooking time and program the
required time for the end of the cooking time. The
electronic circuitry calculated the corresponding
starting time and starts cooking automatically.
Note: Note that easily perishable foodstuffs must not
be left in the oven for too long.
Proceed as follows:
1 Set a cooking time (see section entitled "Cooking
time")
2 Press the
M
key twice. The
×
and
Ò
symbols
flash. The time display shows
¬¬
:
¬¬
or the
current duration.
3 Set the required time with the aid of the
@
and
A
keys.
4 Press the start key
~
. The
×
symbol goes off and
the
Ò
lights up continuously.
After expiry of the duration:
The
Ò
flashes. An audible signal is sounded. The
appliance ends heating. Press any key. The
Ò
symbol
goes off, the signal tone goes off and heating is
started again. Now set the temperature control to 0.
Note: You can even program the switch-off time if you
have not set a cooking time. Simply begin at point 2.
Timer
You can use the timer to program a period of time,
e.g. as an egg timer. You can enter values between
00:01 seconds and 23:50 hours.
1 Press the
@
key. The
y
and
V
symbols flash. The
time display shows
¬¬
:
¬¬
or the current duration.
2 Set the required duration with
@
and
A
.
3 Press the
~
key. The
V
symbol and the elapsing
timer are shown in the display.
The timer starts, even without pressing the
~
key,
if you do not enter anything for 5 seconds.
After expiry of the duration:
the
V
flashes. An audible signal is sounded. Press
any key to end the timer.
Note: While the set timer is running, you can view the
time of the day by pressing the
~
key.
Alarm clock function
A signal tone can be triggered at any time of the day.
The alarm clock function is independent of the other
appliance functions.
Note: The alarm clock function does not switch off
your appliance.
1 Press the
M
key three times. The
y
and
U
symbols flash. The time display shows
¬¬
:
¬¬
or
the current duration.
2 Set the required time with the aid of the
@
and
A
keys.
3 Press the start key
~
. The
y
symbol goes off and
the
U
lights up continuously.
After expiry of the duration:
The
U
symbol flashes. An audible signal is sounded.
Press any key.
U
goes off and the signal tone is
ended.
Stopwatch
You can use the stopwatch to monitor the cooking
time of dishes without programming automatic
deactivation, for example.
The time is displayed beginning at 00:00 and
extending up to a maximum of 12 hours.
Switching the stopwatch on and off:
You start or switch off the stopwatch by pressing
the
A
key.