en
Getting to know your appliance
10
Switching on the appliance for the first time
When the dishwasher is switched on for the first time,
you are taken directly to the settings for switching on
the appliance for the first time. The following text is
indicated on the display window at the top
@
:
Scroll with
< >
Set with
- +
Leave with Setup 3 sec.
The required settings for switching on the appliance for
the first time are listed in the table below.
Change the setting as follows:
1.
Keep pressing button
>
)*
until the required setting
is displayed.
2.
Make the setting with setting buttons
+ -
X
.
3.
Press and hold the Info button
{8
for 3 seconds.
The chosen setting has now been stored.
--------
Settings
The dishwasher has been preset with certain settings
for your convenience. You can change this factory
setting.
Change the setting as follows:
1.
Open the door.
2.
Switch on ON/OFF switch
(
.
3.
Press Info button
{
8
for 3 seconds until the
following text is indicated on the display window at
the top
@
:
Scroll with
< >
Set with
- +
Leave with Setup 3 sec.
4.
Keep pressing button
>
)*
until the required setting
is displayed.
5.
Make the setting with setting buttons
+ -
X
.
6.
Press and hold the Info button
{8
for 3 seconds.
The chosen setting has now been stored.
You have the option of resetting all changed settings
back to the original factory settings.
Note:
When you reset your dishwasher to the factory
settings, you are taken directly to the settings for
switching on the appliance for the first time.
Settings
Switching on the appliance for
the first time
Factory setting
Infotext
by pressing Info button
{
Language
Deutsch
Language selection.
Time format
24h
12h or 24h.
Time setting
12:00
Set the current time.
Water hardness
°E 16 - 20 medium
Setting water hardness. When using
Multitabs, select the lowest setting.
Rinse aid disp.
Setting 5
Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Water connection *
Cold water
Connection to hot water (40-60°C) or cold
water (<40°C) possible.
* depending on the features of your dishwasher
Setting
Factory setting
Infotext
by pressing Info button
{
Time setting
12:00
Set the current time.
Time format
24h
12h or 24h.
Time display
Time
Show end of programme with display "Finish
in" or "Finish at".
Language
Deutsch
Language selection.
* depending on the features of your dishwasher
